SICE S 65 Manual De Instrucciones página 107

Go to previous line:
used for moving the cursor to the previous line. If a word has already been entered on the
new line, the word will be deleted automatically.
Delete last character entered:
moves the cursor back to the left so that the character is deleted.
Set upper case/lower case characters:
selects upper case or lower case characters, alternately.
The data set is stored when the program is exited by pressing exit
You are advised to set your own surname and name on the first line, the name of the city on
the second line, the street on the third line and the telephone number on the fourth line.
Calibrate when detecting that the setting condition is out-of-tolerance or when the machine
so requires as the E 1 message is displayed.
Calibrate as follows:
1. select the sensitivity calibration icon
;
2. Fit a wheel of average dimensions (diameter no less than 14") on the wheel balancer
with only a small unbalance;
3. perform a spin;
4. At the end of the spin, fix the calibration weight supplied with the machine on the
swinging unit bell as indicated in figure 21.
5. perform a second spin;
6. At the end of the spin, change the position of the calibration weight on the swinging
unit bell as indicated in figure 22.
User manual S 65
Sensitivity Calibration
in the configuration program menu
.
UK
107