START THE WATCH
The movement is wound by the motion of the
wrist when worn. When not worn, the watch
stops after approximately 55 hours and has
to be wound manually.
1
Rotate the crown clock-
wise until the power
reserve indication hand
has gotten at least to the
middle of the scale.
2
The entire scale area
displays a power reserve
of about 55 hours.
SET TIME
In order for the date to properly move at
midnight, the hour hand must intentionally
be set to a.m. or p.m. based on the current
time.
1
Pull the crown until it is
in position 2. The second
hand does not move.
2
Move the crown counter-
clockwise until the date
changes. Then deliberately
set the current time either
a.m. or p.m.
Push the crown back to
3
the initial position. The
second hand is back in
motion.
E N G L I S H | 7