Publicidad
Idiomas disponibles
Idiomas disponibles
Figure 10. Remote Control End in the Pool
1.
Point the remote at the cleaner. Press
start or stop the cleaner.
2.
Press and hold the arrows to navigate the
cleaner. Release the button to stop the
command.
NOTE: Using any of the remote control functions stops
any in-progress cleaning cycle.
NOTE: DO NOT leave LIFI remote fully submerged for
extended periods.
3.9
Removal
During the last 10 minutes of the cycle, the
cleaner will climb to different walls and wait at
the waterline. Remove using the handle. Water
will expel to make it lighter (Not available in Floor
Only mode). If the cleaner is not removed at the
waterline, it will return to the floor at the end of
the cycle.
NOTE: If connected to the iAquaLink
notifications will be sent to your mobile device
during this time to alert you to remove the
cleaner while waiting.
3.9.1 Lift System Retrieval with
Remote Control
The Lift System is designed to assist in retrieving
the cleaner from the pool. Lift System can be
activated at any time during or after a cleaning
cycle.
1.
Position the cleaner to face the wall you want
using the remove control arrows.
2.
Press and release the Lift System button on
the remote control.
3.
The cleaner moves to the wall it's facing and
climbs to the waterline.
NOTE: DO NOT leave LIFI remote fully submerged for
extended periods.
Page 10
Figure 11. Cleaner Drives to Wall
to
4.
Figure 12. Remove Cleaner
3.9.2 Hook Retrieval
®
app, push
1.
Figure 13. Removal Hook
2.
Polaris
FREEDOM
PLUS Cordless Robotic Cleaner | Owner's Manual
®
™
Use the handle to take the cleaner out of the
water. The cleaner will quickly expel water to
allow for lighter, easier removal.
When cleaner is on the floor, attach the hook
(stored on the charging caddy) to a standard
pool cleaning pole
(not included).
Secure the hook on the cleaner handle. Bring
the cleaner to the waterline.
Publicidad
