Section 2. Cleaner Specifications
2.1
General Specifications
The general specifications for the cleaner are as
follows:
WARNING
Only use the battery charger supplied with the cleaner.
Charge Station Supply
Voltage
Supply Voltage
Battery Capacity
Operating Power
Cleaner Size (WxDxH)
Weight of Cleaner
Packed Weight
Filtration
Cycle Lengths
Charge Temperature
Water Temperature
Range
Operating Depth
*Class II: An appliance with double insulation
or reinforced insulation that does not require
grounding.
2.2
Contents
The packaging should contain the following items:
• Polaris Cleaner
• Removal Hook
• Charging Caddy
• Remote Control
Figure 1.
Contents
Page 6
110-240 VAC; 50/60 Hz
Class II*
29.4 V DC
9.6 Ah
29.4 W
16 x 16.5 x 11 inches
(41 x 42 x 28 cm)
20 lbs (9.1 kg)
36 lbs (16.5 kg)
All-purpose filter canister
Variable programming
Max 95°F (35°C)
Min 40°F (5°C)
Max 95°F (35°C)
Min 55°F (13°C)
Max 13 ft. (4 m)
Min 15 in. (40 cm)
Polaris
FREEDOM
PLUS Cordless Robotic Cleaner | Owner's Manual
®
™
Section 3. General Cleaner
Operation
3.1
Assemble the Charging Station
1.
Insert the charging station onto the charging
caddy. Firmly push the charging station guides
into the charging caddy holes until charging
station is secure, see Figure 2.
Figure 2.
Assemble Charging Station
Refer to the charging caddy assembly document
for charging caddy assembly instructions.
CAUTION
To prevent damage to the cleaner, be sure to adhere to the following
guidelines:
• Remove the cleaner from the pool after the cleaning cycle is
completed.
• Store out of direct sunlight or inclement weather.
• For retrieval, either use the remote control to activate Lift system
or use the manual retrieval hook, then pickup at waterline.
• Take additional care when lifting the cleaner out of the pool.
It becomes heavier when filled with water.
• Always remove the cleaner from pool when super chlorinating
or adding acid.
• Do not handle cleaner while it is in operation.
• Ensure that the cleaner is not in running mode before handling.