Descargar Imprimir esta página

Polaris FREEDOM Plus Manual De Instalación Y Operación página 14

Robot limpiador inalámbrico

Publicidad

Idiomas disponibles

Idiomas disponibles

Figure 21. Remove and Wash the Filter Canisters
NOTE: Periodically, remove the filter canister and clean
thoroughly with soapy water and a soft bristle
brush
4.
Replace the filter canister into the cleaner.
5.
Store the cleaner on the charging caddy out of
direct sunlight.
Figure 22. Store Cleaner on the Charging Station
NOTE: We recommend to let the cleaner dry before
being positioned on the charging station.
6.3
Storage
Everyday Storage
Store the cleaner in a protected and dry place with
an ambient temperature between 50°F (10°C) and
70°F (21°C), out of reach of children, pets, other
foreign objects, etc.
• Never store or dry the cleaner in direct sunlight.
• DO NOT expose cleaner to fire, excessive
temperatures, ignition sources, or pool and spa
chemicals.
• DO NOT leave the cleaner in the water when not
in use.
Page 14
Polaris
FREEDOM
PLUS Cordless Robotic Cleaner | Owner's Manual
®
Long-Term & Winter
Remove the cleaner from the pool and drain all
water to avoid freezing water damage (freeze
damage is not covered under warranty).
For long term storage, it is recommended to
store the cleaner at 80-100% of battery capacity
(indicated by solid GREEN battery LED).
You may either:
• Leave the cleaner and charging caddy
connected until next use.
• Disconnect and recharge the cleaner at the start
of season.
Store cleaner and charging station out of direct
sunlight, rain or inclement weather.
6.4
Replacing Wear Parts
6.4.1 Replacing Brushes
The cleaner is fitted with PVC brushes with a
"wear" indicator.
Figure 23. Worn Brush Indicator
To maintain cleaner performance at its best you
need to replace the brushes as soon as one of the
wear indicators is reached (even if the blade wear
is not even). It is recommended that you replace
the brushes when the rubber is worn down to
the top of the wear indicator (or every two years,
whichever comes first).
To replace a worn brush:
1.
Separate the edges of the brush and undo the
tabs. Remove the worn brushes.
Raised groove
becomes partially
flattened,
indicating
excessive wear

Publicidad

loading

Este manual también es adecuado para:

FfreedompFrp550ctlr