Publicidad
Idiomas disponibles
Idiomas disponibles
Figure 30. Track Replacement Orientation
4.
Push one side of the track on to the wheel
and fit the rib of the track in the groove of the
wheel.
Figure 31. Start on One Side of the Track
5.
Work the track onto the front wheel and verify
the rib of the track is positioned properly
within the groove of the wheel.
Figure 32. Work the Track On Around the Wheel
Page 16
Polaris
FREEDOM
PLUS Cordless Robotic Cleaner | Owner's Manual
®
™
6.
Push and position the rib of the inner side
of the track in the groove of the rear wheel.
If needed, turn the wheel gently to help with
installation.
Figure 33. Push the Track into Place on the Wheel
7.
Work the track onto the rear wheel and verify
the rib of the track is positioned properly
within the groove of the wheel.
8.
Push and position the rib of the inner side
of the track in the groove of the rear wheel.
If needed, turn the wheel gently to help with
installation.
6.6
Spare Parts
The complete spare parts list and exploded view is
available on the Polaris website.
• USA: polarispool.com
• Canada: polarispool.ca
Contact your local maintenance provider to
perform diagnostic tests or repairs not shown in
general maintenance.
6.7
Recycling & Disposal
The battery and cleaner must be serviced and/
or replaced by a qualified service professional.
DO NOT attempt to service the product
yourself.
Disposal of Li-Ion Batteries
• Regulations and laws pertaining to the recycling and disposal of Li-
Ion batteries vary from country to country as well as by state and
local governments. You should check the laws and regulations where
you live.
• There are a number of facilities that recycle Li-Ion batteries. The
Rechargeable Battery Recycling Corporation's web site, www.rbrc.
org is an excellent source for finding a facility to handle these types
of batteries. If you are not sure if your waste facility can handle Li-Ion
batteries, contact them and verify if they are permitted or not.
Publicidad
