MV Agusta F3 800 R MY23 2023 Manual Del Usuario página 149

"Cruise Control" button
This button automatically determines the cruise speed of the vehicle (see §4.4.10).
"Launch Control" button
If pressed when the vehicle is stationary, this button activates the "Launch Control" function (see §4.4.12); if
pressed while riding the vehicle, it activates the "Speed Limiter" function (see §4.4.11).
Engine stop switch
3
It is used to switch off the engine. The ignition circuit is disabled, preventing the engine from being restarted.
To be able to restart the engine, return the switch to its original position.
NOTE: Under normal conditions, use this switch to shut off the engine.
Engine start button
It is used to start the engine and, when the engine is running, to select the different functions of the display
installed on the instrument panel.
CAUTION: To avoid damaging the electrical equipment, be sure not to hold down the button for
longer than 5 consecutive seconds. If, after some attempts, the engine does not start, refer to
the chapter "TROUBLESHOOTING" in the "Maintenance Manual".
"Engine Map" button
This button automatically selects the engine mapping (see §4.4.14).
Throttle twist grip
It controls the fuel-air mixture supplied to the engine, which regulates engine speed. To increase engine
speed, rotate the hand grip from its idle position counterclockwise.
CONTROLS AND INSTRUMENTS
- 20 -
3