MV Agusta F3 800 R MY23 2023 Manual Del Usuario página 180

q Automatic learning of tyre dimensions (TC2W)
When replacing tyres with dimensions different from
the prescribed values, access the modification mode of
the traction control and press the " " (left) control until
the "A" letter is selected.
Press the "OK" button to activate the automatic lear-
ning of tyre dimensions ("TC2W").
WARNING: The "TC2W" procedure may be
activated when the engine is on, the gear in
neutral, the motorbike stationary with your
feet on the ground.
To perform the automatic learning of tyre dimen-
sions, follow the procedure shown on the display:
• Put the vehicle in motion at a constant speed of 40
km/h with the 2nd gear engaged; the "Cruise Control"
function will be automatically activated.
• Rotate the throttle in rest position; the display starts a
countdown of 5 seconds, during which the traction con-
trol is set according to the road conditions.
• "PROCEDURE COMPLETED" appears on the display
if the setting procedure has been correctly performed.
• On the other hand, if you press the " " (left) control
("EXIT") during setting, the procedure is stopped. "PRO-
CEDURE FAILED" appears on the display.
OPERATION
- 51 -
4
4