MV Agusta F3 800 R MY23 2023 Manual Del Usuario página 183

4.4.6. "FRONT LIFT CONTROL" Mode
Press the " " (right) control until the "FRONT LIFT
CONTROL" mode is selected, then press "OK" for less
than two seconds to enable the modification of the acti-
vation state of the front wheel lift control function. When
this function is enabled, it allows to reduce the risk of loss
of grip of the front wheel on the ground. N.B.: The "Front
Lift Control" function is active by default on the vehicle.
4
NOTE
The "Front Lift Control" function may be acti-
vated even during the use of the vehicle.
By pressing the " " (right) control, the "1" digit
appears on the display; under this condition, the "Front
Lift Control" function is enabled.
By pressing the " " (left) control, the "0" digit
appears on the display; under this condition, the "Front
Lift Control" function is disabled.
Press the "OK" button or don't press any button to
confirm the selected activation state of the "Front Lift
Control" function.
OPERATION
- 54 -
4