SAINT-GOBAIN NORTON 66254431892 Manual De Instrucciones Original página 15

5.2 Insert/remove battery
5.2.1 Insert battery
5.2.2 Remove battery
5.3 Mount of sanding discs
Changing accessories or wear parts while the batteries are connected may accidentally
activate the tool. This may cause slight or severe injuries.
►
Remove the batteries before mounting or removing accessories or wear parts.
NOTE
Put on the sanding discs concentrically.
Remove any dirt and dust from the backup pad before putting on a new sanding
disc, e. g. with microfibre cloths or a brush.
The surface of the backup pad is made of synthetic material (for adhesive sanding discs) for a quick and
safe exchange of the sanding discs.
Press firmly the sanding disc onto the lower side of the backup pad.
EN
Saint-Gobain Abrasives • European Headquarters • 251 rue de l'Ambassadeur • 78700 Conflans • France • www.nortonabrasives.com
!
CAUTION
1 Backup pad
2 Sanding disc
SAINT-GOBAIN ABRASIVES
1 Cordless Denibber Machine
2 Bushing
3 Magnet
Insert the battery into the Cordless Denib-
ber Machine.
Remove the battery from the Cordless
Denibber Machine.
Risk of injuries
15