SAINT-GOBAIN NORTON 66254431892 Manual De Instrucciones Original página 17

6 Operation
Setting tool in a rotating part of the power tool may cause slight or severe injury.
►
Remove setting tools before taking the Cordless Denibber Machine into operation.
Do not put aside the Cordless Denibber Machine before the tool has completely stopped.
Otherwise it may cause slight or severe injuries.
►
Wait until the Cordless Denibber Machine has stopped rotating before putting it aside.
Switch on the Cordless Denibber Machine, apply it with the entire sanding surface onto the area to
be treated and move it with moderate pressure along the work piece.
NOTE
The sanding performance and the sanding pattern are mainly determined by the se-
lected abrasive, the preset speed and the contact pressure.
6.1 Switch the device on/off
EN
Saint-Gobain Abrasives • European Headquarters • 251 rue de l'Ambassadeur • 78700 Conflans • France • www.nortonabrasives.com
!
CAUTION
!
CAUTION
SAINT-GOBAIN ABRASIVES
Risk of injuries
Risk of injuries
Switch the device on/off (front side)
Switch on
Keep the switch ON/OFF (1) pressed on the
front side.
Switch off
Release the switch ON/OFF (1) on the front side.
17