SAINT-GOBAIN NORTON 66254431892 Manual De Instrucciones Original página 18

6.2 Setting rotating speed
NOTE
The speed can be adjusted during operations with the speed controller. The speed de-
pends on the material and the working conditions.
7 Cleaning
ATTENTION
If cleaning is not performed properly there is a possibility of material damages with damages to the
Cordless Denibber Machine or connected devices.
►
Never use caustic, corrosive detergents.
►
Never use a steam jet or high pressure cleaner to clean the device.
Clean regularly the device from dust and dirts.
Clean the plastic parts only with mild detergents.
Never clean the device with compressed air.
EN
Saint-Gobain Abrasives • European Headquarters • 251 rue de l'Ambassadeur • 78700 Conflans • France • www.nortonabrasives.com
Switch the device on/off (backside)
Switch on
Keep the switch ON/OFF (2) pressed on the
backside.
Switch off
Release the switch ON/OFF (2) on the backside
Setting rotating speed (continuous)
Adjust the speed control to the requested po-
sition.
A (-) minimum speed
B (+) maximum speed
SAINT-GOBAIN ABRASIVES
Property damage
18