Charging station
►
The charging station is not intended for use by children and persons with reduced physical, sensory or
mental capabilities or with lack of experience and knowledge.
►
Keep the charging station clean.
►
Before using check the charging station, the cable and the mains plug. Only use the charging station in
perfect condition.
►
Only have the charging station repaired by qualified personnel using genuine replacement parts.
►
Do not use the charging station on flammable surfaces or in inflammable environment.
Safety Instructions for Sanders
►
Make sure that no person shall be endangered by flying sparks. Remove flammable materials near the
power tool. While sanding metals flying sparks may emerge.
►
Make sure that the work piece is in a secured position with a clamping device or a vice.
►
Avoid direct contact with the moving backup pad. Contact with moving parts may cause bruising or
other injuries.
►
While sanding with dust formation there must be made sure an adequate removal by suction and venti-
lation.
►
Before use check the backup pad. In case of cracking, broken parts or other wear do NOT use it.
2.4
Symbols on the device
EN
Saint-Gobain Abrasives • European Headquarters • 251 rue de l'Ambassadeur • 78700 Conflans • France • www.nortonabrasives.com
Mandatory signs on the handle:
1 CE label
2 WEEE symbol
3 Speed range
4 Use respiratory protection (dust mask)
5 Wear gloves
6 Wear safety googles
7 Read the operating manual
SAINT-GOBAIN ABRASIVES
8