Publicidad
Idiomas disponibles
Idiomas disponibles
C
Cleaning and maintenance
Wipe completely dry before replacing the shelves and baskets.
Thoroughly dry all surfaces and removable parts before putting
them back into place.
Although this appliance automatically defrosts, a layer of frost
may occur on the freezer compartment's interior walls if the
freezer door is opened frequently or kept open too long. If the
frost is too thick, choose a time when the freezer is nearly empty
and proceed as follow:
1. Remove existing food and accessories baskets, unplug the
appliance from the mains power and leave the doors open.
Ventilate the room thoroughly to accelerate the process.
2. When defrosting is completed, clean your freezer as described
above.
Caution!
Do not use sharp objects to remove frost from the freezer
compartment. Only after the interior is completely dry
should the appliance be switched back on and plugged
back into the mains socket.
Door seals cleaning
Take care to keep door seals clean.
Sticky food and drinks can cause seals to stick to the cabinet and
tear when you open the door. Wash seal with a mild detergent and
warm water. Rinse and dry it thoroughly after cleaning.
Caution! Only after the door seals are completely dry
should the appliance be powered on.
Replacing the LED light:
Warning: The LED light must not be replaced by the user!
If the LED light is damaged, contact the customer helpline
for assistance.
27
EN
Publicidad
