Publicidad
Idiomas disponibles
Idiomas disponibles
B
Product usage
Warning! When reversing the door, the appliance must not be connected to the
mains. Ensure that the plug is removed from the mains socket.
Tools you will need
8mm socket wrench
Cross-shaped screwdriver
•
When required, tilt the refrigerator back in order to gain access to the base, you should rest
the appliance on soft foam packaging or similar material to avoid damaging the backboard
of the refrigerator. To reverse the door, the following steps are generally recommended.
Different models may correspond to different pictures. Models will be written in the
picture. If some parts are not shown in the picture, please ignore the relevant description.
1.
Stand the refrigerator upright. Open the upper door to take out all door racks (to avoid
racks damaged) and then close the door.
Not provided
Thin-blade screwdriver
8mm wrench
7
Door racks
EN
Publicidad
