Pentair NOCCHI FP Multi EVO-A Manual De Instrucciones página 15

APPLICATION
the Multi EVO pump is a horizontal
non-priming or self-priming multi-stage
pump for pumping clean liquids with-
out solid suspended particles, fibers, or
abrasive materials that may chemically or
mechanically attack the pump, or liquids
not compatible with the pump construc-
tion material.
the pump can be used to pump water in:
• water distribution systems
• irrigation systems
• rain water collection systems
FP/Multi EVO is an assembly made up of
a pump plus automatic electronic control
device, which:
• starts and stops the pump according
to opening and closing of utilities.
• stops the pump if no water supply
is detected, protecting it against dry
running conditions.
• reduces water hammer effect.
• maintenance free.
the start-up pressure is set at 1.5 bar
(not modifiable).
Never use the pump for flamma-
ble and/or explosive liquids.
improper use of the pump can
lead to physical injury and/or
material damage. improper use
of the product will render the warranty
null and void.
Application Limits
• temperature of pumped liquid: from
+5°C to +50°C in compatibility with the
pump materials.
• Maximum ambient temperature:
+40°C;
• Max. operating pressure: 8bar
(0.8MPa);
the data plate (Figure 5) lists the specifi-
cations:
Pos. Description
1 type of pump
2 Flow rate range
3 Head range
4 Minimum head
5 Number of phases
6 Voltage
7 Frequency
8 Motor rpm
9 insulation class
10 Absorbed power of electric pump
11 Rated current
12 Condenser capacity
13 Protection rating
14 Maximum liquid temperature
15 Maximum ambient temperature
16 Maximum operating pressure
17 Weight
18 Serial number
19 Date of manufacture
Sound pressure level
the sound pressure level is below 70dB
(lpA) on the following models:
- FP/Multi EVO-A 3-40
- FP/Multi EVO-A 3-50
- FP/Multi EVO-A 5-40
- FP/Multi EVO-A 5-50.
maximum head
See annex
ENGLISH
15 15