Publicidad
KS — RT515 C/J
Step 3. Installing the sub chassis to the cassette holder unit.
1) Insert the holder arm ass'y shaft into the sub chassis.
}
2) Fit the holder arm spring with the U-shaped groove on the cassette arm(K).
,
3) Set the sub chassis so that its tabs come over the cassette holder unit.
Holder arm spring
Sub chassis
The holder arm spring should
be fitted to the U-shaped grove
on the cassette arm(K).
The tabs should come over the
cassette holder unit.
Step 4. installing the cassette holder unit and sub chassis the chassis.
1) Insert the cassette holder unit's left into the chassis. (At this time ,
the tab on the chassis should come over the cassette holder unit.)
2) Fit mode gear(A) over the chassis's mode gear(B) shaft.
3) Turn the mode gear (A) and mate the ribs.
ne
4) Insert the cassette arm (K) shaft into the holder in the chassis.
5) This complatets assembly.
Mode gear(B)
Cassette arm (K)
The mode gear (A) can also
turn even in the free state.
Mate the convex ribs on the
mode gear (B) with the concave
ribs on the mode gear(A).
Mode gear (A)
The tab should come over the cassette holder unit.
The cassette arm (K) shaft should be
inserted here.
Mode gear(B)
32 (No. 49282)
Publicidad
