Descargar Imprimir esta página

Nilfisk Advance Proterra 13300107 Instrucciones De Uso página 5

Publicidad

Idiomas disponibles

Idiomas disponibles

revised 08/2018
OPERATION CAPABILITIES
This sweeper has been designed and built to clean/sweep smooth and solid floors, and to collect dust and light debris, in civil and
industrial environments, under safe operation conditions by a qualified operator.
CONVENTIONS
Forward, backward, front, rear, left or right are intended with reference to the operator's position, that is to say on the driver's seat
(32).
UNPACKING/DELIVERY
Upon delivery, carefully check that the packing and the machine are not damaged. In case of visible damages, keep the packing
and have it checked by the carrier that delivered it. Call the carrier immediately to fill in a damage claim.
Check that the machine is equipped with the following features:
Sweeper Instructions for Use Manual
Sweeper Spare Parts List
No. 1 battery charger connector
After removing the packing, remove the wooden blocks next to the wheels.
Check the hydraulic system oil level.
Follow the instructions in the "Preparing The Machine For Use" paragraph.
Place a ramp next to the front end of the pallet.
Read the instructions in the "Operating Controls" and "Operating the Machine" sections of this Manual and start the machine.
WARNING!
Use extreme caution when operating the sweeper.
Be certain to be thoroughly familiar with all of the operating instructions prior to using this sweeper. In case of
questions, contact a supervisor or local Advance Industrial Dealer.
Should the sweeper malfunction, do not attempt to correct the problem unless the supervisor directs you to do
so. Have a qualified company mechanic or an authorized Advance Dealer service person make any necessary
corrections to the equipment.
Use extreme care when working on this machine. Neckties, loose clothing, long hair, rings and bracelets can get
caught in moving parts.
Before working on the machine, turn the ignition key (57) to "O" and remove it, engage the parking brake and
disconnect the battery.
Use good common sense, practice good safety habits and pay attention to the yellow decals on this machine.
Drive the machine slowly on inclines. Use the brake pedal (35) to control machine speed while descending
inclines.
Do not turn the machine on an incline; drive straight up or down.
The maximum rated incline during transport with a battery model is 15%.
SAFETY
The following symbols indicate potentially dangerous situations. Always read this information carefully and take all necessary
precautions to safeguard people and property.
The operator's cooperation is essential in order to prevent injury. No accident prevention program is effective without the total
cooperation of the person responsible for the machine operation. Most of the accidents are caused by failure to comply with the
simplest rules for exercising prudence.
09/2010
INSTRUCTIONS FOR USE
33019867 - Proterra™
ENGLISH
3

Publicidad

loading