Publicidad
Idiomas disponibles
Idiomas disponibles
Grill Assembly
IMPORTANT: Remove all packing material prior to assembly/
use.
During assembly, grill lid should be latched and grill should
lie on carpet or cardboard.
1.
Inspect and remove all components from package. (Fig. 3
and Fig. 4)
2.
See carton for parts and hardware packet included with your
unit. Tools required for assembly (wrench and Phillips head
screw driver) are included in hardware packet.
Fig. 3
3.
Move the lid latch to unlock position and open the lid.
(Fig. 5 and Fig. 6)
4.
Remove the water pan and set aside. (Fig. 7)
Fig. 6
5.
Turn over the grill and place onto a soft surface. (Fig. 8)
6.
X 2
7.
B (2)
C (1)
D (1)
Fig. 4
8.
Fig. 5
Fig. 7
Fig. 8
English - 5
Extend the legs and put the ends of the wheeled leg into leg
brackets (Fig. 9).
Attach the handle leg to the grill base with bolt C and spacer
D. (Fig. 10)
C
D
Attach each wheel to axle using one bolt and one washer.
Use the wrench to screw tightly. (Fig. 11)
B
Leg brackets
Fig. 9
Fig. 10
Fig. 11
Publicidad
