EN
Programming the timer for the cooking areas
By turning on the touch display, you can program an
independent timer for each cooking area.
• At least one cooking area must be on and set to a certain
level.
• By pressing the + and - buttons simultaneously, you can
set a countdown for turning off the cooking area. There
are illuminated clock icons (13) next to the display of the
cooking area. To set the timer on a cooking area when there
are more than one cooking area on, you must press the +
and - buttons simultaneously. You will note that the clock
icon will light and move to the various cooking areas each
time you simultaneously press the + and - buttons.
• When the timer of the cooking area is selected, the related
clock icon near the display becomes brighter (13). The
timers programmed for each cooking zone remain active.
• Other functions of the timer are the same as the independent
timer. To increase the time, use the plus button.
• The expiry of the time is signalled by a beep and "00" on
the display and the LED of the cooking area assigned to the
timer flashes. The cooking area is turned off and an "H" is
shown if the area is "hot", otherwise the display shows a
hyphen. The beeping and flashing of the display stop.
• Automatically after 2 minutes.
• When you press the + or - buttons, the timer display turns
off.
Error codes are displayed by the 7-segment display with "E" or
"ER" plus the error number.
Error message
Description
Possible error reason
Troubleshooting
8
E
"flash"
Permanent use of keys; Control unit
cuts off after 10 sec
Water or cooking utensils on the
glass above the control unit
Cleaning of the operational surface