VEVOR V-0.25/8 Manual Del Usuario página 9

the motor
5. The adjusting screws (1) and (2) have related to each other, please adjust them
accordingly.
TROUBLE AND TROUBLE-SHOOTING
The compressor being able to revolve.
1. The revolving direction is not right-motor with wrong wiring-correct
wiring
- The operating pressure is too high-lower the pressure
- The inlet tube is too small&too long-change a larger and shorter one
- The air cleaner or the valve being blocked by accumulated carbon-remove it and
clean up.
- The valve assembly being broken jot incorrectly positioned-send it to the
technical shop for repair
- The packing gaving leakage-change a new one
- The unloading system being damaged out of effect-change a new one
- The piston ring jot the cylinder being worn out-sent it to the technical shop to
repair
2. Parts of the compressor being too hut
- The belt being too tight or the central line being out of alignment-read just it
- The revolving speed being too high-lower the speed-improper lubrication-ref
er to instructions
- The temperature being too high or a poor ventilation in the surroundings-m
ove to the place with good ventilation
3. Revolving slow
- Voltage descended-contact the power company to correct
- The connecting wires being too fine or too long-change to bigger or shorter wires
- The belt being too loose-adjust the belt
- The motor being out of work-send to the electric mechanic shop to repair
4. Revolving with drastic vibration
- Discharging pressure being too high-lower the discharging pressure
- The speed being too high-lower the speed
- 8 -