Blauer. H.T. FF-01 Manual De Uso página 11

Removing the visor (1)
Fig. A
● 1 Open the visor.
● 2 Push the catch slider (A) to release the visor.
● 3 Remove the visor pulling it forward (B).
Replacing the visor
● 1 Put the visor into its open position inserting the joint in the slot.
● 2 Push the visor until the catch slider pops up blocking the visor.
● 3 Close the visor.
● 4 Make sure that the visor opens and closes correctly before use.
11
Fig. B
Sun shield change (2)
● 1 Pull the external visor up.
● 2 Lower the sun shield.
● 3 Release the Sun visor by pulling it out from the ratchet system at point A
first on one side and then on the other.
To mount the new sun visor in the helmet make sure that the attachment point on
the ratchet is lowered, then insert the visor first on one side and then on the other.
Make sure that the visor is well inserted before use.
WARNING:If you are not sure that you properly replaced the visor, do not use your helmet.
The visor could suddenly and without warning become detached from the helmet while
riding, causing you to lose control of your motorcycle, resulting in an accident, personal
injury, or death. Contact your retailer for any assistance or advice. Do not ride with an open
visor and do not try to open or adjust the visor while riding.
Tinted or dark visors should never be used at night or under poor visibility conditions as they
reduce your ability to see. If your visor no longer provides you with clear visibility after a
period of service, you must immediately replace it. Never ride if your visor is scratched, dirty,
foggy or with your vision obscured in any way. Always ride with perfect visibility.