Blauer. H.T. FF-01 Manual De Uso página 12

Wind-stop
To remove the wind-stop pull it inwards in
order to unfasten the three studs.
12
Comfort liner removal
● 1 Release each cheekpad from the helmet by pulling inward, freeing it from the attchment system.
● 2 Flip your helmet over and pull on the cheekpad. Note how the cheekpad plate slips between the
helmet shell and EPS liner for reassembly.
● 3 Remove your comfort liner by releasing it from the snap system on the back of the helmet. Then
remove the comfort liner attachment point, taking note of how the comfort liner attachment slips
into place between the shell and EPS liner. Remove the side-liner pieces by pulling inward,
freeing them from their attachment points.
WARNING: The interior padding is critical to maintain the correct fit of the helmet on your head. If you have any
doubt whatsoever regarding the removal or replacement of the interior padding, do not use your helmet. Contact your
retailer for assistance or advice. Never use your helmet with any part of the interior padding removed. The helmet
will not protect you in an accident.