Medion LIFE SM60 Manual De Instrucciones página 214

214
7.3. Accessory box
The accessory box () is integrated into the extension table.
To open, fold the cover of the extension table forwards. This gives you
access to the accessories contained inside.
8. Preparatory work
8.1. Fitt ing a spool
TIP
Most spools have a notch to hold the thread in place after use. Make sure
that this notch is pointing downwards in order to ensure that the thread
will run evenly and will not catch.
Pull the spool holder () up out of the machine until it audibly clicks
into place.
Place the spool onto the spool holder.
8.2. Winding thread onto the bobbin
Bobbins can be wound onto the sewing machine quickly and easily.
To do this, guide the thread from the spool through the bobbin-wind-
ing thread guide () to the bobbin.
The exact procedure for winding thread onto the bobbin is described in
the following points:
Place the spool onto the spool holder.
Guide the thread from the spool around the bobbin-winding thread
guide as shown in the diagram.
Feed the end of the thread through the hole in the bobbin, as illustrat-
ed, and wind the thread around the bobbin a few times by hand.