Medion LIFE SM60 Manual De Instrucciones página 216

A
2
216
Now guide the thread under the tension spring and into the thread
hole. Make sure that the end of the thread is approx.  cm long.
Check that the bobbin is inserted correctly and can be turned clockwise in
the capsule.
8.5. Inserting the bobbin case
Hold the bobbin case so that the finger (A) of the case is pointing up-
B
wards.
Open the bobbin case toggle lever.
Place the bobbin case on the centre pin and press the bobbin case in
carefully until the finger of the bobbin case enters the recess (B) in the
shuttle track ring.
Release the toggle lever and press it onto the bobbin case.
Close the bobbin case ().
8.6. Threading the upper thread
Please read the following instructions carefully as an incorrect sequence or
thread guiding can lead to broken threads, missed stitches and gathered
fabric.
Before threading the needle, raise the needle to its top position by turn-
ing the handwheel ().
Also move the presser foot lever () to the upper position (). This re-
leases the thread tension and allows the upper thread to be threaded in
easily.
3
2
1
Place a spool onto one of the spool holders ().
Now pass the thread through the upper thread guide ().