Descargar Imprimir esta página

Medion LIFE SM60 Manual De Instrucciones página 223

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 125
10.4. Reverse stitching
Use reverse stitches to reinforce the first and last stitches on a seam.
Press the reverse lever and hold it down.
Press the foot pedal – the more pressure you apply to the foot pedal,
the faster the machine will run.
When you want to change back to forward stitching, simply release the
reverse lever.
10.5. Removing fabric from the sewing machine
When you finish sewing, make sure that the needle is at its highest posi-
tion.
To remove the fabric, raise the presser foot and pull the fabric away
from you out of the machine.
10.6. Changing the sewing direction
Proceed as follows to change direction when you reach the corners of the
material:
Stop the machine and turn the handwheel towards you until the needle
is in the fabric.
Raise the presser foot.
Pivot the fabric around the needle to change the direction as desired.
Lower the presser foot again and continue sewing.
10.7. Cutt ing the thread
Cut the threads using the thread cutter () on the back of the sewing ma-
chine or using scissors. Leave around  cm of the thread hanging behind
the eye of the needle.
10.8. The program selection dial
NOTICE!
Risk of damage!
The program selection dial cannot be rotated °. Overwinding the dial
may damage the mechanism.
Do not turn the programme selector beyond the respective end point
markings " " and " ".
On this sewing machine, you can select a number of different functional
and decorative stitches. You can use the program selection dial () to sim-
ply select the stitch pattern you want.
Before changing the stitch, always make sure that the needle is at its
highest position.
Turn the program selection dial so that the marker is lined up with the
stitch type you want to use.
DE
FR
NL
ES
IT
EN
223

Publicidad

loading

Este manual también es adecuado para:

Md 10689