Tecno-gaz PURA 10 BIOX Manual Del Usuario página 86

ENGLISH
Water connection:
Carry out connections to the quick couplers on the front panel of the main
body as follows :
Infeed: connection to the drinkable water distribution network through the
food‐grade hose (LLDPE) 3/8" coming with the device by fitting the hose with
the net pre filter.
Treated water outfeed: connection to the distribution network of the
supplied equipment (dental units, water cocks, autoclaves etc.) through the
food‐grade hose (LLDPE) 3/8" coming with the device.
Tank: connection between the main body and the storage tank through a
food‐grade ¼" hose (LLDPE) coming with the device. The tank shall be fitted
with the plastic cock coming with the device too.
Pump In: connection between the main body and the Biox hydraulic
component through a food‐grade ¼" hose (LLDPE) coming with the device.
For the moment, let the other end of the hose free.
Pump Out: connection between the main body and the Biox hydraulic
component through a ¼" Teflon™ hose (PTFE) coming with the device. For the
moment, let the other end of the hose free.
Discharge: connection to the waste water collection point. As an alternative,
it is also possible to make a connection to the discharge manifold usually
placed in the cabinet under the basin where or next to which the main body is
located, through a food‐grade ¼" hose (LLDPE) coming with the device and
the relevant connection collar.
N.B.: Connect upstream the siphon!
Electrical connection:
Connect the power cord coming with the device to the socket on the front
panel of the main body and to the power socket.
26