Tecno-gaz PURA 10 BIOX Manual Del Usuario página 87

Positioning and installation of Biox:
Position and fix the Biox hydraulic component as decided for installation next
to system main body. Anchoring to the right wall of the container or to the
left side of the system main body shall be done through self‐tapping screws
to be fitted into the housings of the Biox hydraulic component container (See
Fig. 10). For the anchoring, it is also possible to use self‐adhesive recloseable
tape, (3M Dual Lock™ SJ 355 D).
Fix in the working position the peristaltic pump hose by manually rotating
the pump rotor while positioning the hose.
A: Screw housing
Position and fix the Biox hydraulic component as decided for installation next
to the system main body. Anchoring to the right wall of the container or to
the left side of the system main body shall be done through self‐tapping
screws to be fitted into the housings of the Biox hydraulic component
container (See Fig. 11). For the anchoring, it is also possible to use self‐
adhesive recloseable tape.
Fix in the working position the peristaltic pump hose by manually rotating
the pump rotor while positioning the hose.
27
ENGLISH
Fig. 10