Checking The Stored Code Numbers - cobas Accutrend Plus Instrucciones De Uso

Performing a Test

Checking the stored code numbers

You can display all of the stored code numbers and move back and forth between them.
38
1 If the last stored or used code number is
displayed after powering on the meter,
press the Set button to switch to the next
stored code number. Each time you press
the button, the display shows the code
numbers of the test strips in succession
GLUC > CHOL > TG > LAC (if already
stored).
This display is for information purposes
only. You do not need to select the code
of the test parameter first before perform-
ing a test.
Note: You only need to code the meter the
first time you use a new lot of test strips. If you
insert the code strip every time you test, you
may damage the barcode on the code strip.
Then it may not work when you need it, for
instance, after changing the batteries. See
Code strips on page 35.