cobas Accutrend Plus Instrucciones De Uso página 64

Memory
64
2 Press the Set button to switch between
the memory areas of the four test param-
eters. Each time you press the Set button,
the last stored test result of each memory
area is displayed (GLUC > CHOL > TG >
LAC > GLUC >...). If the area contains no
stored results, two dashes are displayed.
To navigate within one memory area, use the
M button.
3 Press the M button to show the next
oldest result within one memory area.
When you press the button, the place of
the result within the memory is displayed
(here: 02); the actual value is not shown
until you release the button.
When you hold down the M button, older
memory places (02 ... 03 ... 04 ... and so
on) continually appear in the display until
you release the button. Then the result in
the last displayed memory place is shown.