Yamaha 40 Manual De Instalación página 150

2
1
a
3
1
b
c
d
2. Install:
• Wiring harness 1
NOTE:
• Pass the wiring harness through the grom-
met 2.
• Align the taped end a of the wiring harness
with the end of the grommet.
• Bend the wiring harness as shown before
connecting it to the main switch coupler 3,
making sure not to bend the section b of the
wiring harness too much.
c Bend radius: more than 10.0 mm (0.4 in)
d More than 10.0 mm (0.4 in)
141
E