Time Selection - Fagor ADVANCE Serie Manual De Uso Y Mantenimiento

ENGLISH
When the Delta function has been selected, insert the spike into the food and close the
oven.
The core temperature at which the food is to be cooked is displayed in window 9.2. To
change this temperature, press core time/temp setting button (8) and change the value
with the general option knob. To confirm the new temperature value for the Delta
function, press the core time/temp. setting selector button (8) or the general option knob
(18).
The true temperature at the centre of the food is displayed in window 9.1.
Window 7.2 displays a temperature 50º higher than the true core temperature (9.1) and
window 7.1 displays the true temperature of the oven.
Next select the cooking mode as described in the previous paragraph.
After selecting the parameters, press the start/stop button (19) and the oven starts to
work.
The range of temperatures available in Delta mode are as follows.
• Convection
• Mixed
• Regeneration
• Hot steam
• Steam

TIME SELECTION

To select the time function, press the function selector (10). All the options light up and
the selected option flashes. Turn the general option button (18) to change the selection
and select the time option (11.2). To confirm the selected option, press either the
function selector button or the general option knob.
Select the cooking time by pressing the time selector (8) and turning the general option
knob until the required time is obtained. Confirm this value by pressing the time selector
(8) again or by pressing the general option knob (18).
When the time reaches 0, the number starts to flash, the horn is heard and the light
flashes in time with the horn until the door is opened or for a maximum of 30 seconds. If
the door is not opened, the acoustic/visual warning is repeated for 30 seconds every 3
minutes.
The oven temperature is selected by pressing the temperature selector button (6) and
turning the general option knob to the required temperature. Confirm this value by
pressing the time selector (6) again or by pressing the general option knob (18).
The true oven temperature is displayed in window 7.1.
The clock (countdown) is displayed in window 9.1.
After selecting the cooking mode and closing the door, press the start/stop button (19)
and the oven will start to operate with the parameters shown.
The temperature range and defect values for each operating mode are listed below:
VISUAL INSTRUCTION MANUAL
0ºC-99ºC
0ºC-99ºC
0ºC-99ºC
0ºC-99ºC
0ºC-49ºC
27