Configuration Selector Button; Delayed Programming - Fagor ADVANCE Serie Manual De Uso Y Mantenimiento

ENGLISH

CONFIGURATION SELECTOR BUTTON

The configuration selector button is used to modify certain predefined parameters.
• Language: Select required language. Spanish by default.
• Programme date and time: Programme actual date and time.
• Programme Delta: This allows the value to be allocated to the Delta function to
be selected. This value is used whenever working in Delta mode. The Delta
range is from 20 to 80, with a default value of 50.
• Programme temperature scale: This allows selection of the temperature scale to
be displayed, ºC (default) or ºF.
• Thermal stop: This option allows the timer operation to be programmed, that is,
when the countdown of a timed operation begins. If Thermal stop is activated, the
oven does not start the countdown until the appliance reaches the programmed
temperature. On the other hand, if the Thermal stop is Not Activated, the default
option, the countdown starts as soon as the START/STOP button is pressed.

DELAYED PROGRAMMING

Access to the delayed programming option allows the oven to be switched on at a set
time with the established parameters.
First the oven should be programmed with the required parameters, then press the
delayed programming button (16) and select the start time and date. After confirmation,
the upper text displays that the oven has been programmed, showing the start time and
date.
To cancel the programming:
• Press the same button again
• If the oven is switched off or started using the START/STOP button, the
programming will also be cancelled.
To access this option the oven should be switched on but in STOP mode.
VISUAL INSTRUCTION MANUAL
32