Important Safeguards - Cuisinart SmartStick CSB-100 Manual Del Usuario

IMPORTANT SAFEGUARDS

When using an electrical appliance, basic safety precautions should
always be followed, including the following:
1. READ ALL INSTRUCTIONS.
2. Unplug from outlet when not in use, before putting on or
taking off parts and before cleaning. To unplug, grasp plug
and pull from electrical outlet. Never pull cord.
3. To protect against electrical shock, do not put the motor body,
cord or electrical plug of this hand blender in water or other
liquids. Only the detachable blending shaft and other certain
parts of this appliance have been designed for immersion into
water or other liquids. Never submerge any other portion of this
unit. If hand blender falls into liquid, immediately unplug it.
Carefully remove the blending shaft, clean and dry unit thoroughly
before continuing.
4. This appliance should not be used by children and care should
be taken when used near children.
5. Avoid contact with moving parts.
6. During operation keep hands, hair and clothing, as well as
spatulas and other utensils, away from attachments and any
mixing container to reduce risk of injury to persons and/or
damage to the appliance. A spatula may be used, but must be
used only when the unit is not operating.
7. Do not operate any appliance with a damaged cord or plug,
or after the appliance has malfunctioned or has been dropped
or damaged in any way or is not operating properly. Return the
appliance to the nearest Cuisinart Repair Center for examination,
repair or mechanical or electrical adjustment.
8. Remove detachable shaft from the blender before washing the
blades or shaft.
9. Blades are SHARP. Handle carefully when removing,
inserting or cleaning. Exercise the same care when
removing, inserting the cutting blade for the chopper/grinder
attachment.
10. When mixing liquids, especially hot liquids, use a tall container
or make small quantities at a time to reduce spillage, splattering
and possibility of injury from burning.
11. To reduce the risk of injury, never place chopper/grinder
attachment cutting blade on base without first putting work bowl
properly in place.
12. Be certain the chopper/grinder attachment cover is securely
locked in place before operating appliance. Do not attempt to
remove cover until blade has stopped rotating.
13. Check work bowl for presence of foreign objects before using.
2