Assembly; Blending Attachment; Chopper/Grinder Attachment; Reversible Blade - Cuisinart SmartStick CSB-100 Manual Del Usuario

ASSEMBLY

BLENDING ATTACHMENT

1. Align the motor body housing with the blending
shaft and push the pieces together until you
hear and feel them click. It may be helpful to
press the release button when assembling.
2. Plug the motor housing into a electrical outlet.

CHOPPER/GRINDER ATTACHMENT

(WITH REVERSIBLE BLADE)
1. Place the chopping/grinding blade into center of
the work bowl over metal blade shaft
(See REVERSIBLE BLADE, following).
2. Place cover on top of the work bowl. Align notches
on cover and bowl, and turn clockwise to lock into
place.
3. When ready to process food, press power handle
onto cover.
Assemble the parts.
1. Place the chopping cup on a flat, dry, stable surface.
2. The metal blade assembly shaft (A) is attached to the
bottom of the chopping cup. If not already in
place, slide the fully assembled blade assembly
(B) over the top of the metal blade assembly shaft.
2a. Put together the blade assembly if not
assembled: Very carefully connect the blade
ring (C) to the plastic blade sheath (D). Line up
the blade ring opening with the plastic sheath.
There are notches (E) on opposite sides of the interior of the
hub. These fit over ridges on the sides of the plastic blade
sheath (G). Let the blade ring slide to the
bottom of the plastic sheath. HOLD THE
BLADE RING BY THE CENTRAL HUB
HOLDING RIBS (grips) (F) ONLY. DO NOT
TOUCH THE RAZOR-SHARP BLADES.
Pick up the blade ring by its hub holding
ribs (grips) and turn it very slightly
6
E
C
F
G
D
B
A