Yamaha DSP-AZ2 Manual De Instrucciones página 7

0
SPEAKERS A/B
Turn on or off the set of main speakers connected to the A
and/or B terminals on the rear panel at each time its
corresponding button is pressed.
(Depending on the "1H SP B SET" setting on the SET
MENU, the output from each speaker varies when
SPEAKER B is set to on.)
q
BASS
Adjusts the low-frequency response for the left and right
main channels.
Turn the control to the right to increase or to the left to
decrease the low-frequency response.
w
TREBLE
Adjusts the high-frequency response for the left and right
main channels.
Turn the control to the right to increase or to the left to
decrease the high-frequency response.
Note
• If you increase or decrease the high-frequency or the low-
frequency sound to an extreme level, the tonal quality from the
center and rear speakers may not match that of the left and
right main speakers.
e
REC OUT
Selects the source you want to direct to the audio/video
recorder independent of the source you are listening to or
watching in the main room. When set to the SOURCE
position, the input source is directed to all outputs.
r
STEREO/EFFECT
Switches the normal stereo or DSP effect reproduction.
When STEREO is selected, 2-channel input signals are
directed to the main left and right speakers without effect
sounds. All Dolby Digital and DTS audio signals except
for the LFE channel are mixed down to the main left and
right speakers.
t
NEXT
Displays SET MENU items. This button works like n on
the remote control when using the SET MENU.
y
PROGRAM l / h
Selects the DSP program.
u
6CH INPUT
Selects the source connected to the 6CH INPUT jacks.
The source selected by pressing 6CH INPUT takes
priority over the source selected with INPUT (or the input
selector buttons on the remote control).
i
SET MENU +/–
Adjusts the settings and parameter values of SET MENU
items.
o
VIDEO AUX jacks
Inputs audio and video signals from a portable external
source such as a game console. To reproduce source
signals from these jacks, select V-AUX as the input
source.
I Opening and closing the front
panel door
When you want to use the controls behind the front panel
door, open the door gently pressing on the lower part of
the panel. When you are not using them, close the door.
To open, press gently on the lower part of the panel.
CONTROLS AND FUNCTIONS
5