Safety Instructions - SOPRO COMEG SYMBIOZ Cam Manual De Usuario

3

SAFETY INSTRUCTIONS

Read the User Manual.
This user manual is an integral part of the apparatus. It must be made available to the user.
Proper use and correct handling of the apparatus entail following these instructions. The user
alone shall be responsible for any damage that may result from improper use.
• Comply with the conditions of use and storage;
• Do not expose the apparatus to excessive dust;
• The apparatus should be opened only by a competent technician authorized by the manu-
facturer;
• Do not insert metal objects into the apparatus. This is to avoid any risk of electrical shock,
fire, short-circuit or hazardous emissions;
• Do not expose the apparatus to splashed water or to damp;
• Use only the accessories supplied with the apparatus or recommended as options by the
manufacturer;
• This camera is not a flame-proof device. Therefore, it must not be used in the presence of
flammable anaesthetics;
• This apparatus was not designed to be used in an ionising environment;
• This apparatus is not sterile;
• The surface temperature of the camera can reach 41°C (after a few minutes' use). Therefore,
avoid any contact with this area.
• The camera is intended for use by qualified, trained professionals, in an operating theatre.
• Prior to plugging in the apparatus, check that the mains voltage and mains frequency indi-
cated on the apparatus correspond to the power system values.
• Prior to activation, ensure that neither the apparatus nor the power cable is damaged. Dete-
riorated cables and connectors must be replaced immediately.
• Do not drop the apparatus. If the apparatus falls, do not reconnect the apparatus but send
it back to your authorised distributor or directly to the Sopro after-sales service department.
• No additional multiple-socket outlets or extension cords must be connected to the EM system.
To avoid any risk of electrical shock, this device must be connected only to a power system
equipped with protective grounding.
Apparatuses connecting to the input/output ports must comply with the IEC 60950-1 stan-
dard.
Any modification of this device without authorisation from the manufacturer is prohibited. If
the medical device is modified, an inspection and a test must be carried out to ensure that the
medical device complies with the safety regulations.
- 10 -