The equipment must be stored and used within the specified temperature, pressure and
humidity ranges specified in section TECHNICAL SPECIFICATIONS.
It is recommended to keep the device and accessories inside the carrying bag, if the device
will be stored during a long time.
1.5
WARNINGS
DATOSPIR
Use
or those that meet the specifications of this manual. The use of other accessories with
DATOSPIR
can reduce the product's safety or affect the accuracy of measurements.
Handle accessories by their strongest parts (e.g. the connectors when manipulating the
USB cable). DO NOT get them wet or expose them to very abrupt changes of temperature.
DO NOT apply excessive stress to the accessories. In particular, avoid pulling or bending
any part of the cables.
DO NOT disconnect the cable from the device by pulling the cable. You can damage the
device or accessories reducing the product's safety. Hold always the cable by the connector.
DO NOT use deteriorated accessories (USB cable or connectors with broken cases) since
there is risk of cramps.
DO NOT use deteriorated batteries since there is risk of burns, skin irritation, sensitization.
Please contact with
DATOSPIR
system to heat sources or direct sunlight. Temperature changes can cause condensation.
In case of device over-heating during use, immediately turn off the device and please
contact SIBEL's After Sales Service or your dealer.
Keep your device protected from shock and vibration. It can be damaged or function
incorrectly.
Always transport the device and accessories inside the carrying bag. It provides protection
against small accidental impacts.
EN 6
1.5 WARNINGS
only with the accessories provided by the manufacturer or dealer,
SIBEL, S.A.U.
or your dealer to get new accessories.
system is prepared to work at room temperature. DO NOT expose the
DATOSPIR
· User's Manual
511-D00-MUM · Rev 1.01