3.3 BATTERY: INSTALLATION AND CHARGING
DO NOT use battery types different from the ones specified in this manual.
Respect the polarity indicated in the battery placement. If not, the device
will not turn on.
DATOSPIR
alkaline batteries or two rechargeable
Ni-Mh 1.2V 800mAh batteries. In both
cases, the approximate autonomy with
normal use is 5 days.
Use a coin to turn the screw to unblock the
battery cover to remove the battery. Then,
replace them according to the polarity
indicated on the housing.
3.4 VISUAL INDICATIONS AND WARNINGS
Indicator
1 s
...
0,2 s
...
0,1 s
...
0,2 s
...
0,1 s
...
1 s
...
EN 16
can work with two AAA
Warning
Device on
Activated communications
Recovery mode
BIOS Mode
Measurement error
Low battery
DATOSPIR
Description
Transferring data
It allows updating the firmware (only USB)
It allows restoring the firmware when the
communication is interrupted (USB only)
Internal measurement error. Restart the
device or contact Technical Support
Replace the batteries
· User's Manual
511-D00-MUM · Rev 1.01