Working
Actuating the spray gun
Point the spray attachment at the
N
object to be cleaned – never at
persons!
Point the rotary nozzle downwards
N
when starting (if fitted)
2
1
Press the safety latch (1) – the lever
N
(2) is unlatched
Squeeze the lever (2)
N
The motor stops when the lever is
released.
Standby mode
NOTICE
The machine must not be operated in
standby mode for more than 5 minutes.
If work is interrupted for more than
5 min., during breaks or if the machine is
left unattended, switch off the machine
at the master switch – see "Switching off
the machine".
RE 98
High-pressure hose
NOTICE
Do not buckle or loop the high-pressure
hose.
Do not place any heavy objects on the
high-pressure hose, and do not drive
any vehicles over it.
Adding detergent
Remove nozzle from spray lance –
N
see "Fitting, removing spray lance"
3
Fill the container (1) with detergent
N
diluted as directed (approx.
0.5 liters).
Seal the container (1) and
N
nozzle (2)
Engage the container with nozzle
N
into the mount of the spray
lance (3). The nozzle has an anti-
twist device, orient this according to
the groove on the spray lance
After finishing work
Empty the container (1) and rinse it
N
out
Fill the container (1) with clean
N
water
Seal the container (1) and
N
nozzle (2) and mount on the spray
lance (3)
Actuate the spray gun and flush out
N
the residual detergent
English
2
1
43