Functions Of 5 Control Buttons; Removing The Cover & Packing Material - Amano PIX-200 Manual De Instrucciones

Minimum distance from edge of form to print is approximately 0.5mm-2.0mm. (When you slide the
slide lever to the front of the machine) Maximum distance from edge of form to print is
approximately +25.5mm from the minimum distance. (When you slide the slide lever to the back of
the machine)

Functions of 5 control buttons

(-) button When you press the (-) button, you can decrement the set value or move to the
left. You can also change the information on the display.
(+) button When you press the (+) button, you can increment the set value or move to the
right. You can also change the information on the display.
(E) button You can set the value selected on the display by pressing the (E) button.
Thereafter you press this (E) button, you can return to the setting mode.
(+1 HOUR)button This button advances the hour in the display by increments of 1.
(+1MIN.) button This button advances the minutes in the display by increments of 1.
Removing the Cover & Packing Material
1. Insert the key provided and turn counterclockwise to unlock the cover.
2. Lift the cover to remove.
3. Remove the spacer between the Ribbon Cartridge and the Printer Carriage.
1
Spacer
2 3
5