Installation & Maintenance; Wall Mounting - Amano PIX-200 Manual De Instrucciones

INSTALLATION & MAINTENANCE

Wall Mounting

The wall mounting is implemented by our authorized dealers.
IMPORTANT!
This work should not be performed by the customer.
If the PIX-200 is insufficiently mounted, it may fall, resulting in damage to the
unit or a personal injury.
When mounting the PIX-200 on a concrete wall or other special wall material,
prepare special screws.
1. Remove the cover and remove the back plate
by pressing the tab.
2. Using the back plate as a template, mark the
lower mounting hole on the wall.
3. Mount the plate using a #10 wood screw
(or equivalent).
4. Level the back plate and mark the location of
the two upper mounting holes. Secure to the
wooden wall thicker than 10mm using #10
wood screws (or equivalent).
5. Feed the cable of AC power adapter through
one of the holes in the back plate.
6. Align the clock with the two upper tabs on
the back plate. Tilt the back of the clock upwards
to fully insert the back plate tabs into the clock.
Be careful not to pinch the power cord with the bracket.
7. Once the tabs are inserted, tilt the clock back
down and push it against the wall. The tabs will
snap into place.
8. Replace the cover and lock it in place.
21