Amano PIX-200 Manual De Instrucciones página 9

To ensure safe operation, please carefully read the following warnings and cautions
prior to using the PIX 200 Electronic time recorder/stamp.
Do not use with any power voltage other than the specified voltage.
This may cause fire or electric shock.
USE ONLY
SPECIFIED
VOLTAGE!
Do not overload on a single socket.
This may cause fire or electric shock.
DO NOT
OVERLOAD
THE SOCKET!
Do not touch the power plug with wet hands.
This may cause electric shock.
NO WET
HANDS!
Do not harm or damage any cords, such as power cord, etc.
Also, note that putting a heavy object on them, pulling or bending them
PROHIBITED!
by force will likely damage the power code, which may cause fire or electric
shock.
Do not remodel the unit.
This may cause fire or electric shock.
DO NOT
REMODEL!
If any unusual status is found with the unit, such as smoke,
strange odor, heating or other, immediately disconnect the power
plug from the outlet and contact your local dealer for servicing.
If you continue to use the unit, it may cause fire or electric shock.
UNPLUG !
If any object (metal piece, water or other liquid) gets inside the unit,
immediately disconnect the power plug from the power outlet and
contact your local dealer for servicing.
UNPLUG !
If you continue to use the unit, it may cause fire or electric shock.
Before replacing the ribbon cassette, disconnect the power plug from the
power outlet.
Replacing the ribbon cassette while the power plug is connected may cause
UNPLUG !
injury or electric shock.
WARNING
CAUTION
1