Scope Of Delivery; Instructions For Use (Qualified Personnel); Mounting The Power Supply Adapter - Ottobock AxonCharge Integral 757L500 Instrucciones De Uso

NOTICE
Operating the product outside of the permissible temperature range
Lack of proper charging functionality due to malfunction.
► Avoid operating in areas outside the permissible temperature range. The section "Technical
Data" contains information on the permissible temperature range.
NOTICE
Distance to HF communication devices is too short (e.g. mobile phones, Bluetooth
devices, WiFi devices)
Lack of proper charging functionality due to malfunction.
► Therefore, keeping the following minimum distances to these HF communication devices is
recommended:
• Mobile phone GSM 850 / GSM 900: 0.99 m
• Mobile phone GSM 1800 / GSM 1900 / UMTS: 0.7 m
• DECT cordless phones incl. base station: 0.35 m
• WiFi (routers, access points ...): 0.22 m
• Bluetooth devices (third-party products not approved by Ottobock): 0.22 m
5 Delivery/Storage

5.1 Scope of Delivery

1 pc. battery charger
1 pc. power supply
1 pc. EU power supply adapter
1 pc. US power supply adapter
1 pc. instructions for use
5.2 Storage
Observe the specifications in the chapter "Technical Data".

6 Mounting the Power Supply Adapter

By attaching the power supply adapter, the 757L500 AxonCharge Integral can be adapted to
national plug standards.
1. Move the button in the direction of the arrow and remove the cover (Fig. 1).
2. Allow the power supply adapter to lock into the power supply (Fig. 2).
3. Connect the power supply or the optionally available car power supply 4X500 AxonCharge
Mobile. Ensure correct polarity (Fig. 3).
7 Handling
7.1 Starting the Charging Process
1) Plug the power supply unit into the socket-outlet.
2) LED 6 (Fig. 5, item 6) lights up green.
INFORMATION: If LED 6 (Fig. 5, item 6) flashes red, the battery charger or the power
supply unit is defective. Contact Ottobock Myo‑Service.
3) Connect the charging plug to the charging receptacle and allow it to snap into place (Fig. 4).
4) LED 6 (Fig. 5, item 6) begins to flash green and the beeper sounds.
→ The charging process is initialised.
5) LEDs 2–5 light up (Fig. 5, items 2–5).
12 | Ottobock
757L500 AxonCharge Integral
757L500-1 AxonCharge AC-adapter
757S500=EU AxonCharge adapter
757S500=US AxonCharge adapter
647G593