Adjusting Fork; Adjustment Of The Handlebar Position; Adjusting The Rebound Damper - Beta Motorcycles RR 200 2T EUROPA Manual De Usuario

Apply the handlebar.
Apply the top u-bolt.
Refit the screws 6. Tighten to the torque
indicated.
ADJUSTMENT OF THE
HANDLEBAR POSITION
The handlebar can be adjusted by rotating
it back and forth.
To adjust the handlebar loosen screws 1.
Position the handlebar according to re-
quirements.
Tighten to the torque indicated.

ADJUSTING FORK

ADJUSTING THE REBOUND
DAMPER
Extension adjuster A manages the fork
return speed after each compression.
The adjuster closes by moving the control
towards the + sign, thus increasing the
braking effect; the adjuster opens by mov-
ing the control towards the – sign, thus
decreasing the braking effect.
For standard calibration, refer to page
11.
6
1
43
3
25Nm
25Nm
A
EN