Adjusting The Spring Preload; Adjusting The Compression Damper - Beta Motorcycles RR 200 2T EUROPA Manual De Usuario

3

ADJUSTING THE SPRING PRELOAD

The spring pre-load instead adjusts the bike
setup, especially according to the rider's
weight. The front setup raises by moving
the adjustment control B clockwise, and it
lowers by moving it anticlockwise.
B
N.B. When the spring pre-load adjuster
is turned, the hydraulic compression ad-
juster rotates too, but the latter does not
change its setting.
ADJUSTING THE COMPRESSION
C
DAMPER
Hydraulic compression adjuster C is used
to manage the ability of the fork to absorb
a shock. The adjuster closes by moving the
control towards the + sign, thus increasing
the braking effect; the adjuster opens by
moving the control towards the – sign, thus
decreasing the braking effect.
For standard calibration, refer to page 11.
EN
44