Liquid Coolant - Beta Motorcycles RR 200 2T EUROPA Manual De Usuario

Ocultar thumbs Ver también para RR 200 2T EUROPA:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 361

LIQUID COOLANT

CHECK THE LEVEL
Keep the vehicle in vertical position relative
to the ground.
The level of the coolant must be checked
when the engine is cold. Use the following
procedure:
- Unscrew cap 1 and ensure that the liquid
is visible in the lower portion of the load-
ing tube.
- In the case in which the liquid is not visible
remove the vent screw 2 and proceed
topping up.
- At the end of operation refit the filler cap
and the vent screw.
Use the oil indicated on page 16 in
the "Recommended lubricants and liquids"
table.
WARNING: Never unscrew the
filler cap of the radiator when the
engine is hot. Danger of burning!
WARNING:
Wear appropriate protective cloth-
ing and protection gloves.
Keep coolant out of reach of chil-
dren.
Avoid any direct contact of the cool-
ant with skin, eyes or clothing. If this
happens:
- with the eyes, rinse immediately with
plenty of water and seek medical advice;
- with skin, Immediately clean contaminat-
ed areas with soap and water Change
clothing that is contaminated with cool-
ant.
If coolant is swallowed, contact a doctor
immediately.
1
53
4
2
EN

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Rr 200 2t

Tabla de contenido