Declaration Of Conformity - Roger Technology H70/200AC Instrucciones Y Advertencias Para El Instalador

Never try to stop the motorised door or gate while it is moving as this may be
dangerous.
The motorised door or gate may be used by children aged 8 and above, by persons
with diminished physical, sensory or mental capacity and by persons without the
necessary experience and knowledge provided that they are supervised or have
received adequate instruction on using the device safely and to ensure that they
understand the dangers involved in its operation.
Children must be supervised at all times to ensure that they do not play with the
device and that they keep out of the area of action of the motorised door or gate.
Keep remote controls and any other control devices out of the reach of children to
prevent the risk of the motorised door or gate being operated unintentionally.
Failure to observe these instructions may lead to danger.
Any repair or technical interventions must be performed by qualified personnel.
The cleaning and maintenance operations must be performed exclusively by
qualified personnel.
In the event of a fault or malfunction of the product, turn the main power switch off
and have the installation serviced by qualified personnel and refrain from attempting
to repair or perform any direct intervention yourself.
The packaging materials (plastic, polystyrene, etc.) should not be discarded in the
environment or left within reach of children, as they are a potential source of danger.
Dispose of and recycle the packaging items according to the provisions of the laws
in force.
These instructions must be kept and must be made available to any other persons
authorised to use the installation.

Declaration of Conformity

The undersigned Dino Florian, legal representative of Roger Technology - Via Botticelli 8, 31021 Mogliano V.to (TV)
DECLARES that the H70/200AC digital control unit is compliant with the provisions established by Community directives:
– 2006/95/CE LVD Standard
– 2004/108/CE EMC Standard
– 2011/65/CE RoHS Standard
and that all the standards and/or technical requirements indicated as follows have been applied:
EN 61000-6-3
EN 61000-6-2
EN 60335-1
EN 60335-2-103
Last two figures of year in which marking was applied | 09.
Place: Mogliano V.to Date: 02-07-2009 Signature
47