Legal Information; Technical Data - Ottobock 4R182 Harmony P4 modular Instrucciones De Uso

3) Place a towel on the floor or a table and set the vacuum pump onto it.
4) Fill a container with approx. 60 ml distilled water.
5) Connect a hose to the vacuum pump and immerse it in the container.
6) Operate the vacuum pump. The water is suctioned from the container and comes out of the
outlet opening.
INFORMATION: Operate the vacuum pump until no more water comes out of the out­
let opening.
7) Reconnect the filter to the vacuum pump.
8) Reinstall the distal prosthetic components.
8 Maintenance
► A visual inspection and functional test of the prosthetic components should be performed
after the first 30 days of use.
► Inspect the entire prosthesis for wear during normal consultations.
► Conduct annual safety inspections.
► Perform a visual inspection of the elastomer rod annually. Replace the elastomer rod in case
of limited functionality or pronounced signs of wear (see Page 15).
9 Disposal
In some jurisdictions it is not permissible to dispose of the product with unsorted household
waste. Improper disposal can be harmful to health and the environment. Observe the information
provided by the responsible authorities in your country regarding return, collection and disposal
procedures.

10 Legal information

All legal conditions are subject to the respective national laws of the country of use and may vary
accordingly.
10.1 Liability
The manufacturer will only assume liability if the product is used in accordance with the descrip­
tions and instructions provided in this document. The manufacturer will not assume liability for
damage caused by disregarding the information in this document, particularly due to improper
use or unauthorised modification of the product.
10.2 CE conformity
The product meets the requirements of Regulation (EU) 2017/745on medical devices. The CE
declaration of conformity can be downloaded from the manufacturer's website.
10.3 Warranty
The manufacturer warrants this device from the date of purchase. The warranty covers defects
that can be proven to be a direct result of flaws in the material, production or construction and
that are reported to the manufacturer within the warranty period.
Further information on the warranty terms and conditions can be obtained from the competent
manufacturer distribution company.

11 Technical data

Reference number
Weight [g]
System height [mm]
Body weight [kg]
Mobility grade
18
4R182
545
50 to 100 (110 lbs to 220 lbs)
4R183
665
125
50 to 150 (110 lbs to 330 lbs)
2 to 4