Measuring Length - Linear Application - Balluff BML SL1-ALZ Serie Manual De Instrucciones

BML SL1-ALZ _ -U_ ZZ- _ U1L - _ _ _ _
Absolute magnetic encoder system
4
Installation and connection (continued)
4.3.5 Measuring length – linear application
For correct function while maintaining the specified system
accuracies, the magnetic tape length must be greater than
the desired measuring length. There needs to be a reserve
at the beginning and end of the measuring range.
L1
Fig. 4-8: Measurement length, overlap ranges of sensor head to
magnetic tape (longitudinal variant): L1 = overlap range 1,
L2 = overlap range 2
Range Value
Overlap range 1 60 mm
Overlap range 2 5 mm
Measuring length Magnetic tape length – 65 mm
Tab. 4-4: Measuring length data
The maximum measuring length of the system is 8.19 m.
Magnetic tape can be purchased in rolls approx. 48 m long
or precut to a guaranteed length.
For correct function the measuring range of the sensor
head must be adapted to the magnetic tape.
Refer also to the following:
– BML SL1-ALZ0-U1ZZ-_U1L-...
see Section 6.5.1 on page 20.
– BML SL1-ALZ1-UE/MZZ-_U1L-...
see Section 7.5.1 on page 29.
www.balluff.com
1751DE ABS PRC L
Measuring length L2
english 13